====== Contribute ====== The CDLI is a collaborative project with capture and text processing efforts underway in North America, Europe and the Middle East. We adhere to a policy of open access, making our data sets of text and images available over the internet to any user for free. There are two ways you can contribute to our mission: Financially, through a tax deductible donation to the CDLI Foundation, or by providing, catalogues, transliterations, and/or digital images of cuneiform tablets that are not already in our collection. We particularly encourage cuneiformists to monitor their own publications, to alert us of errors or omissions in our files on their work, and to submit to us better or supplemental digital documentation on their own or on the publications of others in their possession. ==== Donations ==== You can help preserve the heritage of the cradle of civilization, stretching from ancient Israel and Syria across Anatolia to Assyria, Babylonian and Persia, by contributing to the CDLI. Your tax deductible donation will support our ongoing capture, processing, and free dissemination of cuneiform tablet collections found worldwide,and it will ensure that these invaluable historical resources remain permanently accessible to future generations. To make a contribution, click [[https://opencollective.com/cdli|here]]. ==== Submissions ==== The CDLI welcomes new tablet images! We send scanning teams to collections whenever possible, but travel and personnel costs limit how much we can do. Therefore, if you are a scholar with a substantial library of cuneiform publications, the curator of a collection of cuneiform tablets, or even the owner of a single tablet, please consider scanning the tablet or book yourself and sending the results to us. Not only will you help improve our understanding of Mesopotamian history and life, but you'll also help preserve that knowledge for future generations. If you do decide to contribute your labor, please look over the following guidelines for scanning tablets and editing text hardcopies. Scanning actual cuneiform tablets differs substantially from scanning printed pages; following these guidelines will protect your tablets, ensure high quality images, and simplify our posting the tablets on the CDLI website. You can submit any image, raw or processed, to the CDLI at: cdli@ucla.edu. Please include in the email a brief description of the image(s), including (when appropriate) location, date and publication number. For a very helpful introduction to important concepts in scanning, see [[http://www.scantips.com|Wayne Fulton's Scantips site]]. ===== Guidelines for Scanning Tablets ===== As three-dimensional objects with rounded and often irregular surfaces, cuneiform tablets behave differently on a scanner than a sheet of paper. The CDLI, however, has developed a workflow that efficiently and reliably delivers high-quality images of tablet surfaces while protecting the tablet from harm. We've prepared the videos and text below to give you an introduction to this workflow, so that you can duplicate our process at your location. ==== Equipment ==== Under ideal conditions, four pieces of equipment are required to produce high quality digital images of most clay tablets: (i) a desktop or laptop computer with substantial processing power, (ii) a reasonably new desktop scanner (at present, CDLI recommends the HP Scanjet 3670 with a deep bed that results in better capture of image depth), (iiI) a means to support tablets during scanning, and (iv) a very dark room (preferably with no windows). In the field, meaning in a variety of museums in various countries around the world, CDLI staff members have improvised a number of alternative methods where one or more of these items was not available, so be creative: the goal is to find a dark workspace (whether a small room or a big cardboard box) and to position each surface of a tablet, facing the surface of the scanner. ==== Scanning the Tablet ==== (1) If at all possible, take the lid of the scanner completely off and place it far enough away that you are not tempted to use it. One of the most likely causes of tablet damage is the lid falling on the tablet while it sits on top of the scanner. If the lid is held on with screws, unscrew it and take it off. (2) Clean the surface of the scanner very well, ''but do not use glass cleaner or other commerical cleaning products'', since this can cause streaking on all subsequent images. The best way to clean the surface is to use a piece of lint-free cloth, and to blow off any dust or clay specks resulting from scanning with a can of compressed air, after each scan and often after placing the tablet on the scanner. Frequent cleaning will help prevent dust from accruing on the image, which will have to be removed during the editing stage. Also, be sure to regularly check for fingerprints or other smudges on the scanner bed using light coming in from an oblique angle. These smudges refract the laser beam used in the scanner, and can lower the quality of the image quite dramatically. (3) Start your scanning software; this may be either a piece of software that came with the scanner or image editing software such as Adobe Photoshop with a plugin (consult the information that came with the scanner for information on attaching the scanner to the computer and installing scanning software). Set the scanner for 600 dpi color photograph; anything less than 600 dpi will not meet current archival image standards recommended for small archaeological artifacts. Moreover, aim for as "raw" a scan of the tablet as possible, leaving off all filters such as "descreen" or "sharpen". These kind of filters are not designed for the narrow range of color and texture of a clay tablet and do not produce good results. CDLI staff members are trained to edit such raw images and produce high quality, esthetically pleasing images, but the raw material of the original scan must be unaltered to do so. (4) Carefully place the obverse of the tablet on the surface of the scanner. In most instances, particularly with small tablets, careful placement requires that your fingertips touch the surface of the scanner. This is acceptable since the fingerprints will not, as a rule, obscure any part of the tablet. They will, however, obscure other tablets that are placed in the same spot, so try to avoid always placing each tablet in the same spot and clean the surface of the scanner whenever fingerprints become visible. (5) Turn off the lights in the room and ensure that any other sources of light (except for the computer screen) are blocked in some way. Any light source other than the scanner will wash out the image and produce less acceptable quality images. Often the computer screen, turned away from the scanner, provides sufficient light to see what you are doing. Otherwise, experiment with a low-wattage lamp well away from the scanner. (6) Scan the tablet and save it in the platform-independent TIF format, with a distinctive name that includes a museum or collection number as well as the particular surface that was scanned, e.g. BM105342_obv.tif. It is important that as descriptive yet concise a label be used for archival images. (7) Pick up the tablet and place it back on the scanner surface with a different surface of the tablet facing the surface of the scanner and repeat steps 4, 5 and 6. Try to always scan surfaces in a particular order and place the resulting files in a single folder. We recommend that tablets be scanned in the following order: obverse, reverse, left edge, right edge, top edge, bottom edge. This should produce, for most tablets, six images as follows: BM105342_obv.tif BM105342_rev.tif BM105342_left.tif BM105342_right.tif BM105342_top.tif BM105342_bot.tif If you do not read cuneiform or cannot otherwise determine which surface is obverse or reverse, just be sure to scan all six surfaces and number them 1 through 6. (8) Edges are difficult to scan due to the fact that tablets do not naturally rest on their edges and a tablet that is standing on its edge could be damaged if it falls over onto the surface of the scanner. So it is always best to prop up a tablet on its edge by some means available to you. Ideally, the supporting props employed should be black in color with a matte finish. These black props then disappear or can more easily be erased when producing the archival "fat cross" representation of tablets chosen by the CDLI ([[http://cdli.ucla.edu/dl/photo/P005478.jpg|example]]). Under no circumstances, however, should a colored or textured background be allows to stand above the tablet so as to appear in the background of the tablet image. (9) Keep your eyes on the surface of the scanner to detect the accumulation of dust and fingerprints (as noted above, careful placement of a tablet on the surface of the scanner often requires touching the surface of the scanner with the fingertips, so expect to clean up a lot of fingerprint smudges). Clear any tablets or props off the surface of the scanner, blow any dust or other particles off the surface and clean off any remaining fingerprints or smudges with a piece of lint-free cloth. (10) Once the tablets are returned to storage and the scanner has been cleaned, be sure to make two copies of the images produced and store them in two distinct locations. CDLI maintains an image archive that has long-term backup support through its partnership with the University of Pennsylvania and the German Max Planck Society, thus ensuring that archival images will be available to future generations. CDLI staff members are happy to produce a single archival image from each set of six surface images and to adjust the appearance of the archival image so that the tablet is easier to read. These services are all available free of charge. ===== Scanning Images ===== ==== Equipment ==== Computing and scanning hardware should be the same as for scanning tablets, save that it is not as important to have a deep-bed scanner. There is also no need for a dark room. ==== Settings for the Scanner ==== The great majority of scanned images are of published autographs (line drawings of texts produced by hand). These should be scanned as an 24 bit RGB image (equivalently, RGB with 8-bits per channel), at a resolution of 150 dpi unless the drawing has particularly fine lines, in which case it should be scanned at 300 dpi resolution. It is best to save even black and white drawings under the RGB format because grayscale images do not preserve well when converting from TIFF to other formats like JPEG. Color or black and white prints should be scanned at 300 dpi, 24 bit RGB. '''Make sure a descreening filter is on to prevent moire patterns from forming on the image.''' It also helps to use an unsharp mask filter to improve contrast, although the image can be passed through this filter during the editing stage. Photographs should be scanned at 300 dpi, 24 bit RGB, although higher scan resolution may be called for. If the scanner has an option for scanning glossy media, use that here. As with prints, use an unsharp mask filter now or save it for the editing stage. ===== Summary ===== Here is a summary of the scanning settings for book images:
Autograph | Color and B&W Prints | Color Photograph | |
Image Type | 24 bit RGB | 24 bit RGB | 24 bit RGB |
Descreening | Off | On | On |
Scan resolution | 150 dpi | 300 dpi | 300+ dpi |